# OPC Browser is offscreen in the designer

**URL:** <https://forum.inductiveautomation.com/t/opc-browser-is-offscreen-in-the-designer/2756>\
**Category:** Archived Topics\
**Created:** [March 11, 2011, 9:35pm UTC](https://forum.inductiveautomation.com/t/opc-browser-is-offscreen-in-the-designer/2756 "2011-03-11T21:35:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![philrenewables](https://avatars.discourse-cdn.com/v4/letter/p/3ec8ea/32.png) [@philrenewables](https://forum.inductiveautomation.com/u/philrenewables)\
**Post date:** [March 11, 2011, 9:35pm UTC](https://forum.inductiveautomation.com/t/opc-browser-is-offscreen-in-the-designer/2756/1 "2011-03-11T21:35:23Z")

</div>

I just opened up a FactoryPMI designer (running version 3.3.3), and I can’t get to the OPC Browser panel. I’ve tried to choose the “reset layout” option, but I still can’t get the OPC Browser panel to appear. I assume it’s appearing somewhere offscreen that I can’t get to. Is there some command I can execute that will force it to dock somewhere I can see it? Or something? this is very frustrating.

Philip Brown

---

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [April 29, 2011, 11:02pm UTC](https://forum.inductiveautomation.com/t/opc-browser-is-offscreen-in-the-designer/2756/2 "2011-04-29T23:02:42Z")

</div>

I think if you go to View \> Panels\> OPC Browser and close it/reopen it that way it should pop back into view.
