# OPC tag shows Null **URL:** \ **Category:** General Discussion\ **Created:** [August 6, 2024, 4:26pm UTC](https://forum.inductiveautomation.com/t/opc-tag-shows-null/94231 "2024-08-06T16:26:31Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Tom\_George](https://avatars.discourse-cdn.com/v4/letter/t/bb73d2/32.png) [@Tom\_George](https://forum.inductiveautomation.com/u/Tom_George)\ **Post date:** [August 6, 2024, 4:26pm UTC](https://forum.inductiveautomation.com/t/opc-tag-shows-null/94231/1 "2024-08-06T16:26:31Z")
v7.9.10 Pulling in a tag from a PLC5. Tag in the browser has a question mark and the value is Null. Its a float (F8:5), non zero value. Thanks! ---
**Author:** ![Tom\_George](https://avatars.discourse-cdn.com/v4/letter/t/bb73d2/32.png) [@Tom\_George](https://forum.inductiveautomation.com/u/Tom_George)\ **Post date:** [August 7, 2024, 6:12pm UTC](https://forum.inductiveautomation.com/t/opc-tag-shows-null/94231/2 "2024-08-07T18:12:08Z")
Just a follow up. I could not figure out what the issue was and didn't get any help here. Using quick client, the tag values were good, just the tag browser they were showing 'null'. I rebooted the Ignition server VM. The tags are working correctly now. ---
**Author:** ![calimero100582](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/calimero100582/32/18630_2.png) [@calimero100582](https://forum.inductiveautomation.com/u/calimero100582)\ **Post date:** [August 8, 2024, 10:48am UTC](https://forum.inductiveautomation.com/t/opc-tag-shows-null/94231/3 "2024-08-08T10:48:14Z")
Do you know what was the status of the device in Ignition? One issue, with SLC driver, is that the device connection is stuck at the status "Disconnected: browse pending", and do not reconnect. I don't know the cause, but I have a scheduled script that disable, then re-enable the device, when the status match.