# OPC Tags Bad\_NotConnected using Studio 5000 Logix Emulate

**URL:** <https://forum.inductiveautomation.com/t/opc-tags-bad-notconnected-using-studio-5000-logix-emulate/95050>\
**Category:** Ignition\
**Created:** [August 23, 2024, 12:53am UTC](https://forum.inductiveautomation.com/t/opc-tags-bad-notconnected-using-studio-5000-logix-emulate/95050 "2024-08-23T00:53:47Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [August 23, 2024, 1:09am UTC](https://forum.inductiveautomation.com/t/opc-tags-bad-notconnected-using-studio-5000-logix-emulate/95050/3 "2024-08-23T01:09:31Z")

</div>

Have you followed the instructions in this comment and following comments?

> [@OPC to Emulate, still looking for answers](https://forum.inductiveautomation.com/t/opc-to-emulate-still-looking-for-answers/80088/43):
>
> @pdixon, I know your question is about making OPC connections to RS Emulate, but I'm going to answer the question about making native Ignition driver connections to RS Emulate. Reviewing my first comment in this topic, I am happy to report that I was wrong. Necessary software, with versions I confirmed to work. Newer versions are expected to work: RSLogix\_Emulate5000 (install folder) aka "Studio 5000 Logix Emulate" (as shown in Control Panel Apps list), v32. FactoryTalk Linx, v6.11 R…

(FTLinx is required along with RSLinx Classic. Both.)

Also, fwiw, the video is unavailable to me.

---

_[View the full topic](https://forum.inductiveautomation.com/t/opc-tags-bad-notconnected-using-studio-5000-logix-emulate/95050)._