# OPC UA - new tags not showing up all the time in Designer

**URL:** <https://forum.inductiveautomation.com/t/opc-ua-new-tags-not-showing-up-all-the-time-in-designer/35306>\
**Category:** Ignition Early Access\
**Created:** [June 3, 2020, 8:22pm UTC](https://forum.inductiveautomation.com/t/opc-ua-new-tags-not-showing-up-all-the-time-in-designer/35306 "2020-06-03T20:22:45Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![ryan.auber](https://avatars.discourse-cdn.com/v4/letter/r/90ced4/32.png) [@ryan.auber](https://forum.inductiveautomation.com/u/ryan.auber)\
**Post date:** [November 11, 2026, 1:05pm UTC](https://forum.inductiveautomation.com/t/opc-ua-new-tags-not-showing-up-all-the-time-in-designer/35306/21 "2026-11-11T13:05:10Z")

</div>

We just had this issue in 8.3.4 AND ITS 2026!

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [November 11, 2026, 1:08pm UTC](https://forum.inductiveautomation.com/t/opc-ua-new-tags-not-showing-up-all-the-time-in-designer/35306/22 "2026-11-11T13:08:27Z")

</div>

If you are running ancient firmware, you have to suffer with ancient (legacy) drivers.

(My alternate driver can talk to the older firmware with modern OPC item paths, if you really don't want to "fix" them.)

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [November 12, 2026, 3:43am UTC](https://forum.inductiveautomation.com/t/opc-ua-new-tags-not-showing-up-all-the-time-in-designer/35306/24 "2026-11-12T03:43:19Z")

</div>

> [@cailyngodlove242925](#):
>
> If that reads successfully, the browse tree is stale rather than the tag being absent.

In the modern Logix driver, the tag will not read successfully if it hasn't been browsed. (True for my alternate driver, too.) Did some LLM tell you this?

[Previous page](https://forum.inductiveautomation.com/t/opc-ua-new-tags-not-showing-up-all-the-time-in-designer/35306.md?page=1)
