# Opc with InduSoft **URL:** \ **Category:** General Discussion\ **Created:** [March 15, 2024, 9:28pm UTC](https://forum.inductiveautomation.com/t/opc-with-indusoft/87425 "2024-03-15T21:28:31Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![Felipe\_CRM](https://avatars.discourse-cdn.com/v4/letter/f/dfb087/32.png) [@Felipe\_CRM](https://forum.inductiveautomation.com/u/Felipe_CRM)\ **Post date:** [March 18, 2024, 2:33pm UTC](https://forum.inductiveautomation.com/t/opc-with-indusoft/87425/7 "2024-03-18T14:33:38Z")
So this link is obviously not Indusoft but it _is_ about Kepware and not being able to find a matching endpoint so maybe you can get some ideas from reading this: > [@OPC Connection Faulted: Endpoint Not Found](https://forum.inductiveautomation.com/t/opc-connection-faulted-endpoint-not-found/61636/16): > > If you make any changes on the KSE side make sure you “reinitialize” the KSE service or whatever they call it. A lot of configuration changes won’t take effect until you do. Basically, check your endpoint URL and your security policy. If you change anything on the Kepware side, make sure you restart the service so the change will actually take. If none of that works, consider switching to Ignition, where you have auto OPC discovery, useful log messages and an active forum of people who know Ignition 😁 --- _[View the full topic](https://forum.inductiveautomation.com/t/opc-with-indusoft/87425)._