# Open an Intranet Address from Ignition **URL:** \ **Category:** Ignition\ **Tags:** ignition80\ **Created:** [June 30, 2020, 1:54pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194 "2020-06-30T13:54:58Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![mhicks1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mhicks1/32/14121_2.png) [@mhicks1](https://forum.inductiveautomation.com/u/mhicks1)\ **Post date:** [June 30, 2020, 1:54pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194/1 "2020-06-30T13:54:58Z")
Good Morning, I have been asked to create a page that can link to an address on our local network. I have looked through the forum and have read about a Web Browser Module. is this necessary to launch from within the local network also? ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [June 30, 2020, 1:59pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194/2 "2020-06-30T13:59:37Z")
The Web Browser module is for embedding a website inside your Vision application. If you just want to launch a browser with a URL, it is not needed. ---
**Author:** ![KGarner](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kgarner/32/15999_2.png) [@KGarner](https://forum.inductiveautomation.com/u/KGarner)\ **Post date:** [June 30, 2020, 2:00pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194/3 "2020-06-30T14:00:37Z")
Take a look at @paul-griffith 's response in [this thread](http://forum.inductiveautomation.com/t/open-link-in-browser-via-scripting/36034/5). Hope this helps! ---
**Author:** ![mhicks1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mhicks1/32/14121_2.png) [@mhicks1](https://forum.inductiveautomation.com/u/mhicks1)\ **Post date:** [June 30, 2020, 2:07pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194/4 "2020-06-30T14:07:14Z")
From a “Home” window in our application, they have requested a button to open another window that will show a schedule that is on the local network. On this window there will also be a button to get back to the “Home” window. This is possible without the web browser? I did not see where to put the Local Network address below. http://v-web\_PORTAL/main\_blend\_xx.aspx ---
**Author:** ![KGarner](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kgarner/32/15999_2.png) [@KGarner](https://forum.inductiveautomation.com/u/KGarner)\ **Post date:** [June 30, 2020, 3:47pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194/5 "2020-06-30T15:47:15Z")
I presume this is referring to Perspective since Vision would be an application rather than a web page. If this is the case, you can use a link component or a button to navigate to your intranet address ---
**Author:** ![mhicks1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mhicks1/32/14121_2.png) [@mhicks1](https://forum.inductiveautomation.com/u/mhicks1)\ **Post date:** [June 30, 2020, 5:20pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194/6 "2020-06-30T17:20:25Z")
This is for Vision. I was referring to a Window in my Vision Application. Sorry for the misunderstanding… I want to open the address from above inside of My Vision Application on a separate Window. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/1/61ae224dc18a646545e03d94284f3b1a803eacaa.png) ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [June 30, 2020, 5:36pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194/7 "2020-06-30T17:36:52Z")
You need the web browser module to do this. ---
**Author:** ![mhicks1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mhicks1/32/14121_2.png) [@mhicks1](https://forum.inductiveautomation.com/u/mhicks1)\ **Post date:** [June 30, 2020, 7:27pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194/8 "2020-06-30T19:27:10Z")
OK. That is what I was wondering. I noticed that there has been some confusion on some posts where to find the module. Can you direct me to the location of the Module? Thank you… ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [June 30, 2020, 7:30pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194/9 "2020-06-30T19:30:24Z")
[https://inductiveautomation.com/downloads/ignition/8.0.14](https://inductiveautomation.com/downloads/ignition/8.0.14) It’s in the modules section. Change the version or check the archive tab if you’re not on 8.0.14. ---
**Author:** ![mhicks1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mhicks1/32/14121_2.png) [@mhicks1](https://forum.inductiveautomation.com/u/mhicks1)\ **Post date:** [June 30, 2020, 8:54pm UTC](https://forum.inductiveautomation.com/t/open-an-intranet-address-from-ignition/36194/10 "2020-06-30T20:54:09Z")
Thank you for your assistance. Found it easily.