# Opening, on one client, two projects that are on separate networks **URL:** \ **Category:** Ignition\ **Created:** [May 30, 2023, 5:40pm UTC](https://forum.inductiveautomation.com/t/opening-on-one-client-two-projects-that-are-on-separate-networks/74311 "2023-05-30T17:40:59Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![kathyb](https://avatars.discourse-cdn.com/v4/letter/k/47e85d/32.png) [@kathyb](https://forum.inductiveautomation.com/u/kathyb)\ **Post date:** [May 30, 2023, 5:40pm UTC](https://forum.inductiveautomation.com/t/opening-on-one-client-two-projects-that-are-on-separate-networks/74311/1 "2023-05-30T17:40:59Z")
I have two applications I would like to open on the same client. One application is on the local gateway and the other is on the remote. I have two NICs installed on the client with addressing based off of the two networks. However, when I try to open the remote application, it wants to use the NIC attached to the local network. I think what I am doing can be done, just missing a step somewhere. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [May 30, 2023, 5:47pm UTC](https://forum.inductiveautomation.com/t/opening-on-one-client-two-projects-that-are-on-separate-networks/74311/2 "2023-05-30T17:47:58Z")
Routing rules on the network interfaces. If both interfaces can route to remote subnets, you will need custom routing rules. { This is purely a network configuration issue, not an Ignition issue. } ---
**Author:** ![kathyb](https://avatars.discourse-cdn.com/v4/letter/k/47e85d/32.png) [@kathyb](https://forum.inductiveautomation.com/u/kathyb)\ **Post date:** [May 30, 2023, 6:02pm UTC](https://forum.inductiveautomation.com/t/opening-on-one-client-two-projects-that-are-on-separate-networks/74311/3 "2023-05-30T18:02:45Z")
Thank you. I will look into that.