# Outgoing Gateway Connection to Redundant Pair

**URL:** <https://forum.inductiveautomation.com/t/outgoing-gateway-connection-to-redundant-pair/37367>\
**Category:** Ignition\
**Created:** [August 4, 2020, 3:47pm UTC](https://forum.inductiveautomation.com/t/outgoing-gateway-connection-to-redundant-pair/37367 "2020-08-04T15:47:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jonathan](https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/32.png) [@Jonathan](https://forum.inductiveautomation.com/u/Jonathan)\
**Post date:** [August 4, 2020, 3:47pm UTC](https://forum.inductiveautomation.com/t/outgoing-gateway-connection-to-redundant-pair/37367/1 "2020-08-04T15:47:39Z")

</div>

When I setup a outgoing Gateway Network Connection to a gateway that is setup in redundancy do I need to make a separate connection going to the master and to the backup? Or do I just make a single connection going to the master?