# Oven Controller Suggestion

**URL:** <https://forum.inductiveautomation.com/t/oven-controller-suggestion/20437>\
**Category:** General Discussion\
**Created:** [October 29, 2018, 7:59pm UTC](https://forum.inductiveautomation.com/t/oven-controller-suggestion/20437 "2018-10-29T19:59:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![ryanjmclaughlin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/ryanjmclaughlin/32/4318_2.png) [@ryanjmclaughlin](https://forum.inductiveautomation.com/u/ryanjmclaughlin)\
**Post date:** [October 29, 2018, 7:59pm UTC](https://forum.inductiveautomation.com/t/oven-controller-suggestion/20437/1 "2018-10-29T19:59:22Z")

</div>

Anyone have any suggestions on an Oven controllers brand/make/model? We have some old ones that died and would like to update to something modern, preferably with OPC-UA built in or at least easy to connect to Ignition.

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [October 29, 2018, 8:30pm UTC](https://forum.inductiveautomation.com/t/oven-controller-suggestion/20437/2 "2018-10-29T20:30:28Z")

</div>

Panel mount? Rail mount?

---

<div class="post-metadata">

**Author:** ![ryanjmclaughlin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/ryanjmclaughlin/32/4318_2.png) [@ryanjmclaughlin](https://forum.inductiveautomation.com/u/ryanjmclaughlin)\
**Post date:** [October 29, 2018, 8:31pm UTC](https://forum.inductiveautomation.com/t/oven-controller-suggestion/20437/3 "2018-10-29T20:31:04Z")

</div>

Panel mount. Current is 1/8 DIN, but there is some space to mod things if needed.

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [October 29, 2018, 9:22pm UTC](https://forum.inductiveautomation.com/t/oven-controller-suggestion/20437/4 "2018-10-29T21:22:42Z")

</div>

Eurotherm and Watlow are the two brands I’m somewhat familar with. I know both provide MODBUS TCP.

Eurotherm has an OPC Server, but I believe it’s separate software.