# Overload with leased tags **URL:** \ **Category:** Ignition\ **Created:** [April 18, 2025, 12:27pm UTC](https://forum.inductiveautomation.com/t/overload-with-leased-tags/105280 "2025-04-18T12:27:22Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 18, 2025, 12:39pm UTC](https://forum.inductiveautomation.com/t/overload-with-leased-tags/105280/2 "2025-04-18T12:39:42Z")
Sounds like you have too many tags at once trying to be polled. You need to study the topics here about Logix optimization. Start here, read the whole thing: > [@Ignition & Logix Best Practice Tips for better communications](https://forum.inductiveautomation.com/t/ignition-logix-best-practice-tips-for-better-communications/60386): > > Hi All, After a whole bunch of issues I have gone down the rabbit hole of what is wrong with our setup on site. I will preface this by saying I a relatively new to all of this.... so be gentle stuck_out_tongue Based on much reading(such wow) I believe I have a list of things our site could take away for a better system. Some of them are easy to implement, whilst some of them need... significant work to realize. Especially the AOI approach in point 5 expressionless Before going too far a… As you read, open tabs for all of the related topics that are linked from it. In your other topic, you mentioned still being in development. Many of the problems can be fixed by restructuring your PLC data. You may need to do that. While there is no magic wand, the closest thing to a magic wand for many cases is to switch to my alternate EtherNet/IP driver. /shameless plug. --- _[View the full topic](https://forum.inductiveautomation.com/t/overload-with-leased-tags/105280)._