# Pattern designer

**URL:** <https://forum.inductiveautomation.com/t/pattern-designer/4561>\
**Category:** Ignition\
**Created:** [May 31, 2012, 7:42pm UTC](https://forum.inductiveautomation.com/t/pattern-designer/4561 "2012-05-31T19:42:15Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![AJBerera](https://avatars.discourse-cdn.com/v4/letter/a/9fc29f/32.png) [@AJBerera](https://forum.inductiveautomation.com/u/AJBerera)\
**Post date:** [May 31, 2012, 7:42pm UTC](https://forum.inductiveautomation.com/t/pattern-designer/4561/1 "2012-05-31T19:42:15Z")

</div>

Is there a way to design our own fill patterns for shapes?

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [May 31, 2012, 8:37pm UTC](https://forum.inductiveautomation.com/t/pattern-designer/4561/2 "2012-05-31T20:37:02Z")

</div>

Yes, there is a create link right below the dropdown list to create a new pattern. The only problem is that we don’t save that pattern in the dropdown list. It only exists on that shape.

---

<div class="post-metadata">

**Author:** ![AJBerera](https://avatars.discourse-cdn.com/v4/letter/a/9fc29f/32.png) [@AJBerera](https://forum.inductiveautomation.com/u/AJBerera)\
**Post date:** [June 4, 2012, 2:36pm UTC](https://forum.inductiveautomation.com/t/pattern-designer/4561/3 "2012-06-04T14:36:56Z")

</div>

ah yes, I missed that one. It’s a shame you cannot have patterns rotate with their root paths.