# Perspective Alarm Status Table Filtering Woes with binding

**URL:** <https://forum.inductiveautomation.com/t/perspective-alarm-status-table-filtering-woes-with-binding/78045>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [August 18, 2023, 2:01am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-filtering-woes-with-binding/78045 "2023-08-18T02:01:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![franklepkowski](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/franklepkowski/32/4808_2.png) [@franklepkowski](https://forum.inductiveautomation.com/u/franklepkowski)\
**Post date:** [August 18, 2023, 2:01am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-filtering-woes-with-binding/78045/1 "2023-08-18T02:01:05Z")

</div>

Hello All,

I am using a popup window that has a parameter passed in to set an "Area" to filter alarms in the status table component. I have a binding on props.filters.active.conditions.source. I am seeing instances where the filter is not applied and I get the wrong alarms, or I get no alarms at all. I should mention this is a scale out architecture and the remote tag provider alarm setting is set to subscribe. I have seen some older forum posts from @nminchin regarding this same issue, and it seems the issue persists in 8.1.26. Any help is appreciated.

Regards,

Frank

---

<div class="post-metadata">

**Author:** ![Bryson\_Prince](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/bryson_prince/32/48866_2.png) [@Bryson\_Prince](https://forum.inductiveautomation.com/u/Bryson_Prince)\
**Post date:** [August 30, 2023, 10:57pm UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-filtering-woes-with-binding/78045/2 "2023-08-30T22:57:25Z")

</div>

Hi Frank,

I think it would be best to reach out to our support department to pursue this issue further. You can submit a support ticket by phone or email by going to the [Inductive Automation Help Center](https://support.inductiveautomation.com/hc/en-us) so one of our support representatives can help sort through this issue live.