# Perspective Alarm Status Table hide or display columns

**URL:** <https://forum.inductiveautomation.com/t/perspective-alarm-status-table-hide-or-display-columns/37349>\
**Category:** Ignition\
**Created:** [August 4, 2020, 9:53am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-hide-or-display-columns/37349 "2020-08-04T09:53:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brett\_Yeomans](https://avatars.discourse-cdn.com/v4/letter/b/35a633/32.png) [@Brett\_Yeomans](https://forum.inductiveautomation.com/u/Brett_Yeomans)\
**Post date:** [August 4, 2020, 9:53am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-hide-or-display-columns/37349/1 "2020-08-04T09:53:34Z")

</div>

Is there a way to toggle columns in the alarm status table through script/expression?  
I tried an expression in the ‘columns’,‘active’ and for the test ‘priority’, ‘enabled’.  
Toggling this bit in designer works but not in run time.  
I want to remove columns based on screen width.