# Perspective Alarm Status Table Issue

**URL:** <https://forum.inductiveautomation.com/t/perspective-alarm-status-table-issue/30815>\
**Category:** Ignition\
**Created:** [December 19, 2019, 5:34am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-issue/30815 "2019-12-19T05:34:05Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![amirsalar.arya.kia](https://avatars.discourse-cdn.com/v4/letter/a/d26b3c/32.png) [@amirsalar.arya.kia](https://forum.inductiveautomation.com/u/amirsalar.arya.kia)\
**Post date:** [December 19, 2019, 5:34am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-issue/30815/1 "2019-12-19T05:34:05Z")

</div>

Hi,

The Alarm Status Table component in perspective doesn’t work. It just keeps trying to load while the Alarm Status Table component in vision works perfectly fine. I don’t change any settings so it loads any alarms there are and still nothing. Not sure how to approach this so any hint is welcome.

Thanks.