# Perspective alarm status table wrapping

**URL:** <https://forum.inductiveautomation.com/t/perspective-alarm-status-table-wrapping/58449>\
**Category:** Ignition\
**Created:** [April 14, 2022, 4:10am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-wrapping/58449 "2022-04-14T04:10:25Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![ASF](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@ASF](https://forum.inductiveautomation.com/u/ASF)\
**Post date:** [April 14, 2022, 4:10am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-wrapping/58449/1 "2022-04-14T04:10:25Z")

</div>

I have a perspective alarm table in a narrow-ish side dock. Responsive mode is enabled so the alarms show up in the “card” style, but the display path is truncated with …

Is there any way to force the Display Path to wrap across multiple lines? This is the most important information and it’s critical that the operator can see the whole description. In the screenshot below I have multiple devices that we can’t receive status information from, but we have no idea of knowing which ones.

 ![Screen Shot 2022-04-14 at 2.09.34 pm](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/1/81f69f776808f6ea7daab932b4d7819e2e5265bf.jpeg)

---

<div class="post-metadata">

**Author:** ![ASF](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@ASF](https://forum.inductiveautomation.com/u/ASF)\
**Post date:** [April 21, 2022, 4:15am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-wrapping/58449/2 "2022-04-21T04:15:46Z")

</div>

Bump?

---

<div class="post-metadata">

**Author:** ![justinedwards.jle](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/justinedwards.jle/32/37854_2.png) [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\
**Post date:** [April 15, 2023, 2:27am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-wrapping/58449/3 "2023-04-15T02:27:37Z")

</div>

Interesting problem. Did you ever make any headway on this?

---

<div class="post-metadata">

**Author:** ![ASF](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@ASF](https://forum.inductiveautomation.com/u/ASF)\
**Post date:** [April 19, 2023, 3:19am UTC](https://forum.inductiveautomation.com/t/perspective-alarm-status-table-wrapping/58449/4 "2023-04-19T03:19:09Z")

</div>

Nope. My alarms still look just the same, unfortunately

Edit: I should add that there is at least now a little button you can click on each alarm to show the full details and read the full alarm message. But it's no substitute for being able to see the full alarm message at a glance.