# Perspective Gauge Component Inner Range On Top of Out Range Needle

**URL:** <https://forum.inductiveautomation.com/t/perspective-gauge-component-inner-range-on-top-of-out-range-needle/60590>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [June 9, 2022, 11:19pm UTC](https://forum.inductiveautomation.com/t/perspective-gauge-component-inner-range-on-top-of-out-range-needle/60590 "2022-06-09T23:19:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![edward.fowler](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/edward.fowler/32/24179_2.png) [@edward.fowler](https://forum.inductiveautomation.com/u/edward.fowler)\
**Post date:** [June 9, 2022, 11:19pm UTC](https://forum.inductiveautomation.com/t/perspective-gauge-component-inner-range-on-top-of-out-range-needle/60590/1 "2022-06-09T23:19:19Z")

</div>

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/5/7589d5c784c4aeb6d56d2fc8052b1cc275a69bd2.png)  
The inner range and needle are gray.  
The out range needle is black (showing in the blue range).  
Is it meant to be this way or is it a “design feature”?

---

<div class="post-metadata">

**Author:** ![obober](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/obober/32/67865_2.png) [@obober](https://forum.inductiveautomation.com/u/obober)\
**Post date:** [June 23, 2022, 6:11pm UTC](https://forum.inductiveautomation.com/t/perspective-gauge-component-inner-range-on-top-of-out-range-needle/60590/2 "2022-06-23T18:11:21Z")

</div>

In the Perspective properties, there is an `outerAxis` and `innerAxis` property. There is a `needle` property underneath each one, with their own respective `color` properties. You can change them to whatever you like.

---

<div class="post-metadata">

**Author:** ![edward.fowler](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/edward.fowler/32/24179_2.png) [@edward.fowler](https://forum.inductiveautomation.com/u/edward.fowler)\
**Post date:** [June 23, 2022, 6:16pm UTC](https://forum.inductiveautomation.com/t/perspective-gauge-component-inner-range-on-top-of-out-range-needle/60590/3 "2022-06-23T18:16:58Z")

</div>

Thanks. I wasn’t very clear. The outer needle (the black one) is covered by the gray inner range…I’d think the needle would be “on top” and not be partially covered by the inner range color…is it supposed to be covered or did I miss a setting?