# Perspective pipe arrows

**URL:** <https://forum.inductiveautomation.com/t/perspective-pipe-arrows/61419>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [June 30, 2022, 9:04pm UTC](https://forum.inductiveautomation.com/t/perspective-pipe-arrows/61419 "2022-06-30T21:04:13Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![josborn](https://avatars.discourse-cdn.com/v4/letter/j/4bbf92/32.png) [@josborn](https://forum.inductiveautomation.com/u/josborn)\
**Post date:** [June 30, 2022, 9:40pm UTC](https://forum.inductiveautomation.com/t/perspective-pipe-arrows/61419/2 "2022-06-30T21:40:32Z")

</div>

I am also not super familiar with pipes, but it looks like a pipe can only have one origin, which i believe is the root of the issue.

> [@New Feature: Perspective Piping](https://forum.inductiveautomation.com/t/new-feature-perspective-piping/49919/61):
>
> Technically yes. Each pipe has a single origin. However different connections can overlap, so you could lay down some pipes in such a way that it appears they’re all leading into the same point. Technically doing so would merge the different pipes, so if that’s a problem (such as when using the Mid Arrow line variation) you can simply press undo once, which undoes the merge, but leaves the connection at the new position. [HvI7q3Sw2G]

---

_[View the full topic](https://forum.inductiveautomation.com/t/perspective-pipe-arrows/61419)._