# Perspective piping tool, pipe ends draws holes in lines **URL:** \ **Category:** Ignition\ **Tags:** perspective\ **Created:** [June 27, 2025, 11:53am UTC](https://forum.inductiveautomation.com/t/perspective-piping-tool-pipe-ends-draws-holes-in-lines/107877 "2025-06-27T11:53:40Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Pdeswert](https://avatars.discourse-cdn.com/v4/letter/p/a8b319/32.png) [@Pdeswert](https://forum.inductiveautomation.com/u/Pdeswert)\ **Post date:** [June 27, 2025, 11:53am UTC](https://forum.inductiveautomation.com/t/perspective-piping-tool-pipe-ends-draws-holes-in-lines/107877/1 "2025-06-27T11:53:40Z")
![afbeelding](https://us1.discourse-cdn.com/inductiveautomation/original/3X/b/0/b0b5bf20ef01ca9fa028768e969367095aec44ad.png) In above picture you can see that lines ending on other lines create small gaps in the pipes. The pipes are set to P&ID how can I solve this ? ---
**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\ **Post date:** [June 27, 2025, 1:03pm UTC](https://forum.inductiveautomation.com/t/perspective-piping-tool-pipe-ends-draws-holes-in-lines/107877/2 "2025-06-27T13:03:54Z")
Try this post, I think there is an overlap setting. > [@New Feature: Perspective Piping](https://forum.inductiveautomation.com/t/new-feature-perspective-piping/49919/116): > > Is there documentation or videos on how to draw with these? I have found that I get confused on the combining and drawing functions. Yes, we have documentation in the Ignition User Manual. [Perspective Pipes - Ignition User Manual 8.1 - Ignition Documentation](https://docs.inductiveautomation.com/display/DOC81/Perspective+Pipes) I've considered making a video, I've been preoccupied with the early development stages of the next big feature, but I could make time. Is there a way to individually set the arrow direction or hide the arrow by section? For example…