# Perspective table multiple subview parameters set

**URL:** <https://forum.inductiveautomation.com/t/perspective-table-multiple-subview-parameters-set/58652>\
**Category:** Ignition\
**Tags:** ignition81, perspective\
**Created:** [April 20, 2022, 11:03pm UTC](https://forum.inductiveautomation.com/t/perspective-table-multiple-subview-parameters-set/58652 "2022-04-20T23:03:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![sathianandan.dharmas](https://avatars.discourse-cdn.com/v4/letter/s/53a042/32.png) [@sathianandan.dharmas](https://forum.inductiveautomation.com/u/sathianandan.dharmas)\
**Post date:** [April 20, 2022, 11:03pm UTC](https://forum.inductiveautomation.com/t/perspective-table-multiple-subview-parameters-set/58652/1 "2022-04-20T23:03:02Z")

</div>

Hi All  
I was trying to build a table with subview and utilize the multiple ‘subviewExpansionMode’. After configuring the parameters to load the subview, when I expand a subview the parameter populates just fine but when I leave one expanded and expand the second one, both of the subviews now have the same set of parameters as I’m passing only one set. Is there a way to pass through different set of parameters for different subviews?

Thanks  
Sam

---

<div class="post-metadata">

**Author:** ![plo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/plo/32/33875_2.png) [@plo](https://forum.inductiveautomation.com/u/plo)\
**Post date:** [April 22, 2022, 9:18pm UTC](https://forum.inductiveautomation.com/t/perspective-table-multiple-subview-parameters-set/58652/2 "2022-04-22T21:18:33Z")

</div>

Are you trying to dynamically change a parameter on a per row basis?

Subviews are used to dynamically show the table row column’s value. An example can be found here in our user manual. [Displaying a SubView in a Table - Ignition User Manual 8.0 - Ignition Documentation](https://docs.inductiveautomation.com/display/DOC80/Displaying+a+SubView+in+a+Table)

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/6/462879bebccc2e2113108e78831db0dea3ca85ff.png)

Note: that the value object has to be named “value” and the object properties are table’s column names.

---

<div class="post-metadata">

**Author:** ![sathianandan.dharmas](https://avatars.discourse-cdn.com/v4/letter/s/53a042/32.png) [@sathianandan.dharmas](https://forum.inductiveautomation.com/u/sathianandan.dharmas)\
**Post date:** [April 25, 2022, 11:04pm UTC](https://forum.inductiveautomation.com/t/perspective-table-multiple-subview-parameters-set/58652/3 "2022-04-25T23:04:23Z")

</div>

Thanks a lot, the trick was using the object ‘value’ and column names for the parameters