# Perspective Table Row Height not working with embedded view columns

**URL:** <https://forum.inductiveautomation.com/t/perspective-table-row-height-not-working-with-embedded-view-columns/78382>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [August 25, 2023, 10:48am UTC](https://forum.inductiveautomation.com/t/perspective-table-row-height-not-working-with-embedded-view-columns/78382 "2023-08-25T10:48:02Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![alex3](https://avatars.discourse-cdn.com/v4/letter/a/71e660/32.png) [@alex3](https://forum.inductiveautomation.com/u/alex3)\
**Post date:** [September 10, 2026, 5:06pm UTC](https://forum.inductiveautomation.com/t/perspective-table-row-height-not-working-with-embedded-view-columns/78382/7 "2026-09-10T17:06:55Z")

</div>

I know this is an old thread, but I ran into this issue today. I couldn't figure out why my row heights were so large when using a column `view`.

This thread also had some ideas: [[FEATURE-16567] Perspective Table Row Height - Ignition Early Access - Inductive Automation Forum](https://forum.inductiveautomation.com/t/feature-16567-perspective-table-row-height/33466/15)

But they either didn't work or felt very hacky.

What I had missed is that the table row height seems to respect the `basis` value of the container used for the column view. Easy to miss the `basis` when you just change the default viewport size when developing the `view`.

---

_[View the full topic](https://forum.inductiveautomation.com/t/perspective-table-row-height-not-working-with-embedded-view-columns/78382)._