# Perspective Template Web Nav 8.1

**URL:** <https://forum.inductiveautomation.com/t/perspective-template-web-nav-8-1/56497>\
**Category:** Ignition\
**Tags:** ignition81, perspective\
**Created:** [February 24, 2022, 8:07am UTC](https://forum.inductiveautomation.com/t/perspective-template-web-nav-8-1/56497 "2022-02-24T08:07:15Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![tupanaster](https://avatars.discourse-cdn.com/v4/letter/t/5daacb/32.png) [@tupanaster](https://forum.inductiveautomation.com/u/tupanaster)\
**Post date:** [February 25, 2022, 8:07pm UTC](https://forum.inductiveautomation.com/t/perspective-template-web-nav-8-1/56497/6 "2022-02-25T20:07:49Z")

</div>

I appreciate your return since, even after all the research and trial-error process, I still wasn't sure what was possible.

> [@lrose](#):
>
> The “Header” view’s size parameter would have to be set from where it is embedded. It seems like this is bound to the breakpoint container’s position.size property which would dictate if the embedded container was in the Large or Small breakpoint.

Since I'm a beginner, I directly nested a Breakpoint Container in a "small" Breakpoint Container. I found it hard to manage as I had to do it for every View.

> [@lrose](#):
>
> As far as I am aware there is no notion of identically named parameters being passed down through many calls.

That makes sense! Because it simply does not work this way, I could not find anything that supported my idea.

All in all, I think I get it now. I hope this post help others and I would also add:

> [@Perspective - Breakpoint - Get view size](https://forum.inductiveautomation.com/t/perspective-breakpoint-get-view-size/39833/5):
>
> I spent some time testing this scenario and found some discrepancies in behaviors. I reached out to Dev and got an explanation that I thought I’d share here. This can be done by using breakpoint containers, but it requires a very specific setup. @john.glynn suggested Message Handlers in the breakpoints, but you MUST use Embedded Views within the breakpoints, and then the Views you select to use for the Embedded View should have the different logic. From Dev (paraphrased): Both of a Breakpoi…

---

_[View the full topic](https://forum.inductiveautomation.com/t/perspective-template-web-nav-8-1/56497)._
