# Perspective view with larger resolution

**URL:** <https://forum.inductiveautomation.com/t/perspective-view-with-larger-resolution/73117>\
**Category:** Ignition\
**Tags:** perspective, ignition81\
**Created:** [May 1, 2023, 8:47pm UTC](https://forum.inductiveautomation.com/t/perspective-view-with-larger-resolution/73117 "2023-05-01T20:47:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ANKIT\_BARAD](https://avatars.discourse-cdn.com/v4/letter/a/6f9a4e/32.png) [@ANKIT\_BARAD](https://forum.inductiveautomation.com/u/ANKIT_BARAD)\
**Post date:** [May 1, 2023, 8:47pm UTC](https://forum.inductiveautomation.com/t/perspective-view-with-larger-resolution/73117/1 "2023-05-01T20:47:57Z")

</div>

I have pipes in all of my perspective views. I am using coordinate container as piping only available in this type. I have set up mode as percent.

When I run perspective on larger screens, components and pipes are not at the same place.

Also I need to use perspective app, in percent mode it is not working. I have to use fixed mode for app but then I face resolution problem on larger screens.

Please share thoughts.

---

<div class="post-metadata">

**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Post date:** [May 1, 2023, 9:07pm UTC](https://forum.inductiveautomation.com/t/perspective-view-with-larger-resolution/73117/2 "2023-05-01T21:07:12Z")

</div>

Have you set the aspect ratio of the coord container? I set this to the resolution of the view, width:heightalso, are all of your other embedded views set to percent mode with aspect ratio set as well?