# Perspective XY Chart, 2 y-axes , 2 lines, 2 columns (opposite y-axis) issue

**URL:** <https://forum.inductiveautomation.com/t/perspective-xy-chart-2-y-axes-2-lines-2-columns-opposite-y-axis-issue/71206>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [March 17, 2023, 3:38am UTC](https://forum.inductiveautomation.com/t/perspective-xy-chart-2-y-axes-2-lines-2-columns-opposite-y-axis-issue/71206 "2023-03-17T03:38:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![eden](https://avatars.discourse-cdn.com/v4/letter/e/5f9b8f/32.png) [@eden](https://forum.inductiveautomation.com/u/eden)\
**Post date:** [March 17, 2023, 3:38am UTC](https://forum.inductiveautomation.com/t/perspective-xy-chart-2-y-axes-2-lines-2-columns-opposite-y-axis-issue/71206/1 "2023-03-17T03:38:36Z")

</div>

![Perspective XY CHart](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/0/7088e6ff1e8d51fbb3bc94bf412e2c0e757ae166.png)  
 ![m3_order_values](https://us1.discourse-cdn.com/inductiveautomation/original/3X/5/8/58947d4d2cfe7b2ca4321f627ecaaf497a028b32.png)

Has anyone encountered an issue in perspective xy chart when there are 2 series that is using the opposite y-axis? Please see attached photos. m3\_order\_line\_actual is using "m3\_order" y-axis which is set as opposite=true but it is not using the opposite y-axis. From memory this wasn't a problem last year (if i can remember it right) but it is an issue now.