# Phantom Designer Sessions **URL:** \ **Category:** Ignition\ **Created:** [October 18, 2021, 10:24pm UTC](https://forum.inductiveautomation.com/t/phantom-designer-sessions/52085 "2021-10-18T22:24:53Z")\ **Posts on this page:** 1\ **Showing post:** 8
**Author:** ![A\_Power](https://avatars.discourse-cdn.com/v4/letter/a/87869e/32.png) [@A\_Power](https://forum.inductiveautomation.com/u/A_Power)\ **Post date:** [February 22, 2024, 9:43pm UTC](https://forum.inductiveautomation.com/t/phantom-designer-sessions/52085/8 "2024-02-22T21:43:11Z")
Jumping on here just to keep the attention up. This is an issue for my site presently running 8.1.32. We have a redundant gateway so no biggie restarting, it is still not ideal though @Kevin.Herron - Seems to be a thing - will see if our network team can find anything along the lines of what pturmel mentioned here. > [@Anyone have problems with project mutating after save?](https://forum.inductiveautomation.com/t/anyone-have-problems-with-project-mutating-after-save/85637/5): > > i would not be surprised if that's the issue here. we have a literal dinosaur of a Cisco that desperately needs replacing. this might be the ammo i need to push that over the edge (literally, if they'll let me). thanks for the heads-up on that. that just saved me hours of generalized combing through my running Wireshark capture. you da boss, Phil. sunglasses off i go to dig through hardware specs and do come specific testing to confirm if that's the case here. EDIT: blow me down, that… --- _[View the full topic](https://forum.inductiveautomation.com/t/phantom-designer-sessions/52085)._