# Phoenix Contact Controllers (ILC 131 Eth)

**URL:** <https://forum.inductiveautomation.com/t/phoenix-contact-controllers-ilc-131-eth/54258>\
**Category:** Ignition\
**Created:** [December 17, 2021, 7:19pm UTC](https://forum.inductiveautomation.com/t/phoenix-contact-controllers-ilc-131-eth/54258 "2021-12-17T19:19:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![bobr1](https://avatars.discourse-cdn.com/v4/letter/b/7993a0/32.png) [@bobr1](https://forum.inductiveautomation.com/u/bobr1)\
**Post date:** [December 17, 2021, 7:19pm UTC](https://forum.inductiveautomation.com/t/phoenix-contact-controllers-ilc-131-eth/54258/1 "2021-12-17T19:19:23Z")

</div>

Does anyone have experience configuring a Phoenix Contact controller for communicating with Ignition. If so, what protocols are available and what procedure(s) do we need to follow.

---

<div class="post-metadata">

**Author:** ![andrews](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@andrews](https://forum.inductiveautomation.com/u/andrews)\
**Post date:** [December 17, 2021, 7:42pm UTC](https://forum.inductiveautomation.com/t/phoenix-contact-controllers-ilc-131-eth/54258/2 "2021-12-17T19:42:29Z")

</div>

What model are you using?

---

<div class="post-metadata">

**Author:** ![bobr1](https://avatars.discourse-cdn.com/v4/letter/b/7993a0/32.png) [@bobr1](https://forum.inductiveautomation.com/u/bobr1)\
**Post date:** [December 17, 2021, 9:27pm UTC](https://forum.inductiveautomation.com/t/phoenix-contact-controllers-ilc-131-eth/54258/3 "2021-12-17T21:27:10Z")

</div>

I don’t have the documentation with me but I believe it is the ILC 131 Eth.

---

<div class="post-metadata">

**Author:** ![rbabcock](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/rbabcock/32/13425_2.png) [@rbabcock](https://forum.inductiveautomation.com/u/rbabcock)\
**Post date:** [December 20, 2021, 5:55pm UTC](https://forum.inductiveautomation.com/t/phoenix-contact-controllers-ilc-131-eth/54258/4 "2021-12-20T17:55:53Z")

</div>

FWIW it does appear to support Modbus protocol.