# Pipe Sizes Varying

**URL:** <https://forum.inductiveautomation.com/t/pipe-sizes-varying/3581>\
**Category:** Ignition\
**Created:** [November 10, 2011, 2:43pm UTC](https://forum.inductiveautomation.com/t/pipe-sizes-varying/3581 "2011-11-10T14:43:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![peadair](https://avatars.discourse-cdn.com/v4/letter/p/da6949/32.png) [@peadair](https://forum.inductiveautomation.com/u/peadair)\
**Post date:** [November 10, 2011, 2:43pm UTC](https://forum.inductiveautomation.com/t/pipe-sizes-varying/3581/1 "2011-11-10T14:43:05Z")

</div>

Hi,  
When i go to resize a pipe by selecting it and dragging it back and forth with the arrow (for example the length is 176 and the width is 10) and i am dragging the arrow back to change the length to 150, the width is changing by 1 each time i perform this action so the width will change to 11  
 ![](https://us1.discourse-cdn.com/inductiveautomation/original/1X/d4e235745714c7c8e9783df09ba4a01797c0e187.jpg)

---

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [November 17, 2011, 9:46pm UTC](https://forum.inductiveautomation.com/t/pipe-sizes-varying/3581/2 "2011-11-17T21:46:35Z")

</div>

Thanks for spotting this one, it’s been fixed for 7.3.2