# Pipeline Block and Pipeline Editor panel not showing

**URL:** <https://forum.inductiveautomation.com/t/pipeline-block-and-pipeline-editor-panel-not-showing/19364>\
**Category:** Ignition\
**Created:** [August 22, 2018, 4:49pm UTC](https://forum.inductiveautomation.com/t/pipeline-block-and-pipeline-editor-panel-not-showing/19364 "2018-08-22T16:49:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jgorospe](https://avatars.discourse-cdn.com/v4/letter/j/3e96dc/32.png) [@jgorospe](https://forum.inductiveautomation.com/u/jgorospe)\
**Post date:** [August 22, 2018, 4:49pm UTC](https://forum.inductiveautomation.com/t/pipeline-block-and-pipeline-editor-panel-not-showing/19364/1 "2018-08-22T16:49:17Z")

</div>

When I create a new alarm notification pipeline the pipeline block panel and editor is not showing therefore I cannot create or edit a pipeline. Please advise.

Version 7.9.7

---

<div class="post-metadata">

**Author:** ![jgorospe](https://avatars.discourse-cdn.com/v4/letter/j/3e96dc/32.png) [@jgorospe](https://forum.inductiveautomation.com/u/jgorospe)\
**Post date:** [August 25, 2018, 1:57am UTC](https://forum.inductiveautomation.com/t/pipeline-block-and-pipeline-editor-panel-not-showing/19364/3 "2018-08-25T01:57:41Z")

</div>

Problem solved - Cleared the Local Cache (.ignition folder) and got the panels back.