# Pipeline Dropout Conditions

**URL:** <https://forum.inductiveautomation.com/t/pipeline-dropout-conditions/7466>\
**Category:** Ignition\
**Created:** [October 25, 2013, 12:40am UTC](https://forum.inductiveautomation.com/t/pipeline-dropout-conditions/7466 "2013-10-25T00:40:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![WillMT10](https://avatars.discourse-cdn.com/v4/letter/w/7feea3/32.png) [@WillMT10](https://forum.inductiveautomation.com/u/WillMT10)\
**Post date:** [October 25, 2013, 12:40am UTC](https://forum.inductiveautomation.com/t/pipeline-dropout-conditions/7466/1 "2013-10-25T00:40:36Z")

</div>

Wondering if it is possible to set some pipelines to dropout when the alert “Cleared” and then set other pipelines to dropout when the alert “Acknowledged”? Currently it appears that all of the pipelines are tied to the same dropout conditions. This would be helpful because we have some alerts that are active for very short amounts of time but need to be manually acknowledged and therefore the “Acknowledged” dropout condition would be best. At the same time we have a lot of alerts where we would like to use the “Cleared” dropout condition since they do not require acknowledgement.

I can work around this by unselecting all dropout conditions and using function blocks in the logic flow but it would be easier if we could change the conditions for each pipeline.

Thanks,  
-Will

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 25, 2013, 1:18am UTC](https://forum.inductiveautomation.com/t/pipeline-dropout-conditions/7466/2 "2013-10-25T01:18:25Z")

</div>

Yeah… the fact that they’re all tied to the same condition is a bug. It’s already been fixed for the next release 🙂

---

<div class="post-metadata">

**Author:** ![WillMT10](https://avatars.discourse-cdn.com/v4/letter/w/7feea3/32.png) [@WillMT10](https://forum.inductiveautomation.com/u/WillMT10)\
**Post date:** [October 25, 2013, 2:37am UTC](https://forum.inductiveautomation.com/t/pipeline-dropout-conditions/7466/3 "2013-10-25T02:37:20Z")

</div>

Awesome! Thanks Kevin!