# PLC and PC Communication With XINJE XD5E

**URL:** <https://forum.inductiveautomation.com/t/plc-and-pc-communication-with-xinje-xd5e/74550>\
**Category:** General Discussion\
**Created:** [June 5, 2023, 6:17am UTC](https://forum.inductiveautomation.com/t/plc-and-pc-communication-with-xinje-xd5e/74550 "2023-06-05T06:17:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![thisum\_kariyawasam](https://avatars.discourse-cdn.com/v4/letter/t/e9bcb4/32.png) [@thisum\_kariyawasam](https://forum.inductiveautomation.com/u/thisum_kariyawasam)\
**Post date:** [June 5, 2023, 6:17am UTC](https://forum.inductiveautomation.com/t/plc-and-pc-communication-with-xinje-xd5e/74550/1 "2023-06-05T06:17:49Z")

</div>

Im trying to establish a connection between PLC to PC to Send some simple data, Like sending integer "1" to PC from PLC when a button connected to the PLC is pressed. I achieved this through RS 485from XC series. but now im tring to do with TCP/IP Communication through Xinje XD series PLC. any advices on the process and softwares to use in PC to check the receiving the data?

---

<div class="post-metadata">

**Author:** ![justinedwards.jle](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/justinedwards.jle/32/37854_2.png) [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\
**Post date:** [June 5, 2023, 7:36am UTC](https://forum.inductiveautomation.com/t/plc-and-pc-communication-with-xinje-xd5e/74550/2 "2023-06-05T07:36:08Z")

</div>

By PC, do you mean an Ignition client?

If I'm understanding this correctly, it sounds like you're looking for this information:  
[https://docs.inductiveautomation.com/display/DOC81/Connecting+to+Modbus+Device](https://docs.inductiveautomation.com/display/DOC81/Connecting+to+Modbus+Device)