# PLC DDT tags create a folder and a tag of the struct

**URL:** <https://forum.inductiveautomation.com/t/plc-ddt-tags-create-a-folder-and-a-tag-of-the-struct/73554>\
**Category:** Ignition\
**Created:** [May 10, 2023, 6:36pm UTC](https://forum.inductiveautomation.com/t/plc-ddt-tags-create-a-folder-and-a-tag-of-the-struct/73554 "2023-05-10T18:36:51Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Emile\_Laplante](https://avatars.discourse-cdn.com/v4/letter/e/c57346/32.png) [@Emile\_Laplante](https://forum.inductiveautomation.com/u/Emile_Laplante)\
**Post date:** [May 10, 2023, 6:36pm UTC](https://forum.inductiveautomation.com/t/plc-ddt-tags-create-a-folder-and-a-tag-of-the-struct/73554/1 "2023-05-10T18:36:51Z")

</div>

Hi,

With control expert, I create DDT tags which are a "struct" of tags:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/f/5/f5bc1b2ed8bfe247cce9a1926ee2087ea4c65a10.png)

I link the PLC to ignition with OPC Factory Server.

When I import the tags in the designer, there is a folder with the tag of the struct and a tag that represents the struct:

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/0/e0019b4d81bd3263cc6e794630986511abca7be3.png)

How can I prevent the "struct tag" to be created and only see the "struct folder"?

Too, when I import the tags in a projet the struct folders don't follow:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/9/1/91977c2294fff899356d6c2bdc37eb1b6b58ab44.png)

What is the issue?

Thank you