# PLC Driver Question

**URL:** <https://forum.inductiveautomation.com/t/plc-driver-question/34210>\
**Category:** Module Development\
**Created:** [April 24, 2020, 7:46pm UTC](https://forum.inductiveautomation.com/t/plc-driver-question/34210 "2020-04-24T19:46:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![neil1](https://avatars.discourse-cdn.com/v4/letter/n/278dde/32.png) [@neil1](https://forum.inductiveautomation.com/u/neil1)\
**Post date:** [April 24, 2020, 7:46pm UTC](https://forum.inductiveautomation.com/t/plc-driver-question/34210/1 "2020-04-24T19:46:16Z")

</div>

Hi I am curious if I can retrieve the running program in any of the PLCs the Ignition driver stack supports. Is this possible and if not does anyone know of a driver suite that will let me gather this information?

I do not want to change the program. Simply read a copy of what is running.

Than-you.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [April 24, 2020, 7:59pm UTC](https://forum.inductiveautomation.com/t/plc-driver-question/34210/2 "2020-04-24T19:59:47Z")

</div>

This isn’t possible with any of the drivers.

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [April 24, 2020, 10:53pm UTC](https://forum.inductiveautomation.com/t/plc-driver-question/34210/3 "2020-04-24T22:53:33Z")

</div>

This thread on plctalk may point you in the right direction.

[http://www.plctalk.net/qanda/showthread.php?t=62873](http://www.plctalk.net/qanda/showthread.php?t=62873)