# PLC using Logix Driver goes "Idle"

**URL:** <https://forum.inductiveautomation.com/t/plc-using-logix-driver-goes-idle/18505>\
**Category:** Ignition\
**Created:** [June 18, 2018, 12:14pm UTC](https://forum.inductiveautomation.com/t/plc-using-logix-driver-goes-idle/18505 "2018-06-18T12:14:03Z")\
**Posts on this page:** 1\
**Showing post:** 47

<div class="post-metadata">

**Author:** ![jay.lafave](https://avatars.discourse-cdn.com/v4/letter/j/a587f6/32.png) [@jay.lafave](https://forum.inductiveautomation.com/u/jay.lafave)\
**Post date:** [November 20, 2020, 5:59pm UTC](https://forum.inductiveautomation.com/t/plc-using-logix-driver-goes-idle/18505/47 "2020-11-20T17:59:34Z")

</div>

I am seeing this same issue with Ignition 8.1.0 during PLC Downloads to both a 5069-L320 CompactLogix and a 1756-L82ES ControlLogix. Both running 32.011.

Will try increasing Max Concurrent Requests and potentially the new OPC UA module.

---

_[View the full topic](https://forum.inductiveautomation.com/t/plc-using-logix-driver-goes-idle/18505)._