# PLCSIM-Scada Ignition

**URL:** <https://forum.inductiveautomation.com/t/plcsim-scada-ignition/48080>\
**Category:** Ignition\
**Created:** [June 22, 2021, 7:51pm UTC](https://forum.inductiveautomation.com/t/plcsim-scada-ignition/48080 "2021-06-22T19:51:25Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![patrikludvik](https://avatars.discourse-cdn.com/v4/letter/p/ea666f/32.png) [@patrikludvik](https://forum.inductiveautomation.com/u/patrikludvik)\
**Post date:** [June 22, 2021, 7:51pm UTC](https://forum.inductiveautomation.com/t/plcsim-scada-ignition/48080/1 "2021-06-22T19:51:25Z")

</div>

Hello guys, I have problem with connection to the scada via plcsim, I have NetToPlcSim but Scada still cannot connect. I set up the IP adress in scada for the device as is Network Address but still connecting … any ideas ? Or some really good manual ? YouTube did not help me at all. Thx.

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [June 22, 2021, 8:14pm UTC](https://forum.inductiveautomation.com/t/plcsim-scada-ignition/48080/2 "2021-06-22T20:14:08Z")

</div>

Pinging @chi for you. I know he’s done it. 🙂

---

<div class="post-metadata">

**Author:** ![chi](https://avatars.discourse-cdn.com/v4/letter/c/0ea827/32.png) [@chi](https://forum.inductiveautomation.com/u/chi)\
**Post date:** [June 22, 2021, 8:50pm UTC](https://forum.inductiveautomation.com/t/plcsim-scada-ignition/48080/3 "2021-06-22T20:50:50Z")

</div>

Please show us some information about your setup.

- PLC hardware config
- NetToPlcSim config
- Ignition S7 driver config

NetToPlcSim is for simulated legacy S7-300 CPU so make sure youre not running a simulated S7-1500.

---

<div class="post-metadata">

**Author:** ![patrikludvik](https://avatars.discourse-cdn.com/v4/letter/p/ea666f/32.png) [@patrikludvik](https://forum.inductiveautomation.com/u/patrikludvik)\
**Post date:** [June 23, 2021, 3:20am UTC](https://forum.inductiveautomation.com/t/plcsim-scada-ignition/48080/4 "2021-06-23T03:20:47Z")

</div>

I have S-1500 but as I found out in tutorial with set up 0/1 it should run also for S-1200 set up of NetToPlc 0/2 should be ok

---

<div class="post-metadata">

**Author:** ![chi](https://avatars.discourse-cdn.com/v4/letter/c/0ea827/32.png) [@chi](https://forum.inductiveautomation.com/u/chi)\
**Post date:** [June 23, 2021, 7:07am UTC](https://forum.inductiveautomation.com/t/plcsim-scada-ignition/48080/5 "2021-06-23T07:07:33Z")

</div>

You are right, i just run a quick test and it works with a simulated S7-1500. I wouldn’t have expected that 🙈

---

<div class="post-metadata">

**Author:** ![alexsunny734](https://avatars.discourse-cdn.com/v4/letter/a/9e8a1a/32.png) [@alexsunny734](https://forum.inductiveautomation.com/u/alexsunny734)\
**Post date:** [June 28, 2021, 11:18am UTC](https://forum.inductiveautomation.com/t/plcsim-scada-ignition/48080/6 "2021-06-28T11:18:34Z")

</div>

> [@patrikludvik](#):
>
> I have S-1500 but as I found out in tutorial with set up 0/1 it should run also for S-1200 set up of NetToPlc 0/2 should be ok [Ometv](https://ometv.onl) [chatroulette](https://chatroulette.top)

thanks for the awesome information.

---

<div class="post-metadata">

**Author:** ![stra](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/stra/32/23678_2.png) [@stra](https://forum.inductiveautomation.com/u/stra)\
**Post date:** [October 5, 2021, 7:38pm UTC](https://forum.inductiveautomation.com/t/plcsim-scada-ignition/48080/7 "2021-10-05T19:38:45Z")

</div>

NetToPlcSim is a game for the good simulation with siemens 1500 plc use SIMATIC S7-PLCSIM Advanced:

[SIMATIC S7-PLCSIM Advanced V4.0 TRIAL download - ID: 109795016 - Industry Support Siemens](https://support.industry.siemens.com/cs/document/109795016/simatic-s7-plcsim-advanced-v4-0-trial-download?dti=0&lc=en-WW)