# Plejd for Ignition

**URL:** <https://forum.inductiveautomation.com/t/plejd-for-ignition/92869>\
**Category:** Module Development\
**Created:** [July 7, 2024, 4:56pm UTC](https://forum.inductiveautomation.com/t/plejd-for-ignition/92869 "2024-07-07T16:56:15Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sonny\_bergenholtz](https://avatars.discourse-cdn.com/v4/letter/s/7feea3/32.png) [@Sonny\_bergenholtz](https://forum.inductiveautomation.com/u/Sonny_bergenholtz)\
**Post date:** [July 7, 2024, 4:56pm UTC](https://forum.inductiveautomation.com/t/plejd-for-ignition/92869/1 "2024-07-07T16:56:15Z")

</div>

Hi,

Has anyone managed to get plejd controls into Ignition?  
I have looked at [hassio-plejd/plejd at 544172d8066cdbe0d3246fa8758d0e8afe2830be · icanos/hassio-plejd · GitHub](https://github.com/icanos/hassio-plejd/blob/544172d8066cdbe0d3246fa8758d0e8afe2830be/plejd) which is a working implementation for homeassistant.  
But I don't have the skills to convert/do any of this for Ignition.

Thanks in advance

---

<div class="post-metadata">

**Author:** ![jimender2](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jimender2](https://forum.inductiveautomation.com/u/jimender2)\
**Post date:** [July 9, 2024, 6:25am UTC](https://forum.inductiveautomation.com/t/plejd-for-ignition/92869/2 "2024-07-09T06:25:18Z")

</div>

It looks like plejd just communicates using MQTT which Ignition supports using the MQTT Engine Module for Ignition.

---

<div class="post-metadata">

**Author:** ![Sonny\_bergenholtz](https://avatars.discourse-cdn.com/v4/letter/s/7feea3/32.png) [@Sonny\_bergenholtz](https://forum.inductiveautomation.com/u/Sonny_bergenholtz)\
**Post date:** [July 9, 2024, 8:53am UTC](https://forum.inductiveautomation.com/t/plejd-for-ignition/92869/3 "2024-07-09T08:53:01Z")

</div>

Yes I have set up a raspi with homeassistant and added the plugin in the link above.  
So now I get the status of lights in mqtt that I can reach inside ignition.

But the tags from mqtt in ignition is put to read only.  
I don't know if that is changable inside gateway but my suspicion is that plejd only uses mqtt to show the result.  
The communication with lights are done with Bluetooth.

Best regards