# Position sticky on perspective tables would be very useful

**URL:** <https://forum.inductiveautomation.com/t/position-sticky-on-perspective-tables-would-be-very-useful/80625>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [October 17, 2023, 11:45pm UTC](https://forum.inductiveautomation.com/t/position-sticky-on-perspective-tables-would-be-very-useful/80625 "2023-10-17T23:45:03Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![beck58](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@beck58](https://forum.inductiveautomation.com/u/beck58)\
**Post date:** [July 3, 2025, 1:09am UTC](https://forum.inductiveautomation.com/t/position-sticky-on-perspective-tables-would-be-very-useful/80625/5 "2025-07-03T01:09:16Z")

</div>

Hi Andrei, here is my workaround:

> [@How to freeze a column in table](https://forum.inductiveautomation.com/t/how-to-freeze-a-column-in-table/92736/3):
>
> Yes it is possible it doesn't work immediately because you need the inset properties and you need it to attach to the correct parent. Here is how you do it: Set position: sticky; Set atleast one of the inset properties: i.e top, right, bottom, and left (top:0; or left:0;) Ensure it attaches to correct ancestor by checking there are no hidden scrolling areas between the ancestor of choice and the sticky component (See attached [https://polypane.app/blog/getting-stuck-all-the-ways-position-stick…](https://polypane.app/blog/getting-stuck-all-the-ways-position-sticky-can-fail/)

---

_[View the full topic](https://forum.inductiveautomation.com/t/position-sticky-on-perspective-tables-would-be-very-useful/80625)._