# Power Chart Legend Scaling **URL:** \ **Category:** Ignition\ **Created:** [July 18, 2022, 4:19pm UTC](https://forum.inductiveautomation.com/t/power-chart-legend-scaling/62014 "2022-07-18T16:19:18Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Mitchell\_Lagenour](https://avatars.discourse-cdn.com/v4/letter/m/b19c9b/32.png) [@Mitchell\_Lagenour](https://forum.inductiveautomation.com/u/Mitchell_Lagenour)\ **Post date:** [July 18, 2022, 4:19pm UTC](https://forum.inductiveautomation.com/t/power-chart-legend-scaling/62014/1 "2022-07-18T16:19:18Z")
I have been using power charts for a project and there is a small issue with the bottom legend and how it scales. ![1](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/2/6204d638865bd32a4f4589a79a1142f9ff736a25.png) As seen in the photo, there are 4 pens in the power chart. However, the legend at the bottom only displays 3 and you have to scroll down to see the other one. No matter what size I make the power chart, it will only show 3 pens. The plot itself scales with the screen but the bottom legend does not. If the screen gets small enough, a horizontal bar shows up. Is there a way to scale the legend below to view all the pens without scrolling? Thanks ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [July 18, 2022, 6:05pm UTC](https://forum.inductiveautomation.com/t/power-chart-legend-scaling/62014/2 "2022-07-18T18:05:47Z")
See a possible solution here: > [@Perspective Power Chart Pen Table Height](https://forum.inductiveautomation.com/t/perspective-power-chart-pen-table-height/50647/6): > > You should not edit the theme.css files directly but create a new theme that imports the light theme. And use the new theme. Changes in the css files might also require a restart of the server to reload them