# Power Chart ( Style settings for Normal State and Highlighted State )

**URL:** <https://forum.inductiveautomation.com/t/power-chart-style-settings-for-normal-state-and-highlighted-state/47817>\
**Category:** Ignition\
**Created:** [June 16, 2021, 9:16am UTC](https://forum.inductiveautomation.com/t/power-chart-style-settings-for-normal-state-and-highlighted-state/47817 "2021-06-16T09:16:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tohhy-pm17](https://avatars.discourse-cdn.com/v4/letter/t/e19adc/32.png) [@tohhy-pm17](https://forum.inductiveautomation.com/u/tohhy-pm17)\
**Post date:** [June 16, 2021, 9:16am UTC](https://forum.inductiveautomation.com/t/power-chart-style-settings-for-normal-state-and-highlighted-state/47817/1 "2021-06-16T09:16:44Z")

</div>

Hi guys have a good days.

Image below show the chart settings for Power Chart which the user is able to change the normal state and highlighted state by themselves.

In this case, may I know that it is possible to do all the settings in Ignition Designer which the users do not need to change the line one by one after they select the tagging.

 ![2](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/3/034f5bb3ed3d22ecd384f2e5fb4697dcc779a270.png)

Image below shows the result when the user change the settings for the state.

 ![1](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/d/2d3895caf6ba823dda17e7433126e8eef8360d02.png)

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![Brad\_Medley](https://avatars.discourse-cdn.com/v4/letter/b/82dd89/32.png) [@Brad\_Medley](https://forum.inductiveautomation.com/u/Brad_Medley)\
**Post date:** [May 24, 2022, 4:05pm UTC](https://forum.inductiveautomation.com/t/power-chart-style-settings-for-normal-state-and-highlighted-state/47817/2 "2022-05-24T16:05:12Z")

</div>

I would love to know the answer to this also!

---

<div class="post-metadata">

**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\
**Post date:** [May 24, 2022, 4:12pm UTC](https://forum.inductiveautomation.com/t/power-chart-style-settings-for-normal-state-and-highlighted-state/47817/3 "2022-05-24T16:12:21Z")

</div>

Run the preview in _Designer_, add the tags, set the pens the way you like them and save the project.  
The properties set will be added to the Power Chart props starting at `PROPS.pens.0.display.styles.normal.stroke`.

It’s actually quite clever in that you modify the settings directly on the chart itself while running in preview mode.