# Power table and Auto Row Height offset - VISION

**URL:** <https://forum.inductiveautomation.com/t/power-table-and-auto-row-height-offset-vision/69148>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [January 30, 2023, 1:25pm UTC](https://forum.inductiveautomation.com/t/power-table-and-auto-row-height-offset-vision/69148 "2023-01-30T13:25:26Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Aiasa21](https://avatars.discourse-cdn.com/v4/letter/a/aeb1de/32.png) [@Aiasa21](https://forum.inductiveautomation.com/u/Aiasa21)\
**Post date:** [January 30, 2023, 1:25pm UTC](https://forum.inductiveautomation.com/t/power-table-and-auto-row-height-offset-vision/69148/1 "2023-01-30T13:25:26Z")

</div>

Good morning,  
I have a power table where I query the default table "Notes". I set the wrap text for the note columns because sometimes the text is longer than the column. So I also enable the Auto Row Height to see the rows.  
I don't like the result because the rows are too close to each other, should be possible to set an offset between them?

Thank you for the help.

---

<div class="post-metadata">

**Author:** ![justinedwards.jle](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/justinedwards.jle/32/37854_2.png) [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\
**Post date:** [January 31, 2023, 1:10am UTC](https://forum.inductiveautomation.com/t/power-table-and-auto-row-height-offset-vision/69148/2 "2023-01-31T01:10:55Z")

</div>

There is an intercell spacing parameter for the power table:  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/9/79f4c838665e66171f4458d4838f2161da91ad37.png)

Setting the height to 25 pixels produces the following result:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/5/25a5ac6d7c6f2632c301af1c5eb3552eb590d857.png)

---

<div class="post-metadata">

**Author:** ![jespinmartin1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jespinmartin1/32/57175_2.png) [@jespinmartin1](https://forum.inductiveautomation.com/u/jespinmartin1)\
**Post date:** [January 31, 2023, 4:38am UTC](https://forum.inductiveautomation.com/t/power-table-and-auto-row-height-offset-vision/69148/3 "2023-01-31T04:38:23Z")

</div>

Correct, that is the short solution.

---

<div class="post-metadata">

**Author:** ![Aiasa21](https://avatars.discourse-cdn.com/v4/letter/a/aeb1de/32.png) [@Aiasa21](https://forum.inductiveautomation.com/u/Aiasa21)\
**Post date:** [January 31, 2023, 6:47am UTC](https://forum.inductiveautomation.com/t/power-table-and-auto-row-height-offset-vision/69148/4 "2023-01-31T06:47:12Z")

</div>

Thank you very much, I really missed it!

Have a nice day guys.