# Power Table Customisation

**URL:** <https://forum.inductiveautomation.com/t/power-table-customisation/101408>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [January 27, 2025, 9:57am UTC](https://forum.inductiveautomation.com/t/power-table-customisation/101408 "2025-01-27T09:57:14Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![danielps1818](https://avatars.discourse-cdn.com/v4/letter/d/ecae2f/32.png) [@danielps1818](https://forum.inductiveautomation.com/u/danielps1818)\
**Post date:** [January 27, 2025, 10:16am UTC](https://forum.inductiveautomation.com/t/power-table-customisation/101408/2 "2025-01-27T10:16:35Z")

</div>

You should write border as a **BorderFactory**. Then you are able to modify specific borders.

Here is an example I found:

> [@Vision Power Table - Add columns border with configureEditor()](https://forum.inductiveautomation.com/t/vision-power-table-add-columns-border-with-configureeditor/67607/3):
>
> I found a few moments this morning to adapt the above suggestion into my test table. arrow_forward Here is the sample code: Here is the result:

Hope this helps

---

_[View the full topic](https://forum.inductiveautomation.com/t/power-table-customisation/101408)._