# PowerFlex 525 UDT

**URL:** <https://forum.inductiveautomation.com/t/powerflex-525-udt/74544>\
**Category:** 3rd Party Modules\
**Created:** [June 5, 2023, 1:32am UTC](https://forum.inductiveautomation.com/t/powerflex-525-udt/74544 "2023-06-05T01:32:27Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [June 5, 2023, 12:17pm UTC](https://forum.inductiveautomation.com/t/powerflex-525-udt/74544/3 "2023-06-05T12:17:58Z")

</div>

Have you created such a UDT in a Rockwell or Omron processor? If so, you could temporarily point my [generic EtherNet/IP driver](https://forum.inductiveautomation.com/t/automation-professionals-ethernet-ip-communication-suite-v2/68190) to obtain the structure in JSON format for Ignition. (Even just in trial mode.)

If you are trying to monitor or control such a device via EtherNet/IP without a PLC, you will want that driver for that, too.

---

_[View the full topic](https://forum.inductiveautomation.com/t/powerflex-525-udt/74544)._