# Powerflex 525

**URL:** <https://forum.inductiveautomation.com/t/powerflex-525/8393>\
**Category:** Archived Topics\
**Created:** [April 30, 2014, 7:19am UTC](https://forum.inductiveautomation.com/t/powerflex-525/8393 "2014-04-30T07:19:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![CalculusAE](https://avatars.discourse-cdn.com/v4/letter/c/7ab992/32.png) [@CalculusAE](https://forum.inductiveautomation.com/u/CalculusAE)\
**Post date:** [April 30, 2014, 7:19am UTC](https://forum.inductiveautomation.com/t/powerflex-525/8393/1 "2014-04-30T07:19:07Z")

</div>

Hi,

I have connected a powerflex 525 using the SLC driver. IT appears as a bridged\_ip ethernet device. I am not sure how to manually add the tags to see if I can see the frequency, current voltage from the drive ? Does anyone know where I can look up the addressing to manually enter the path? I understand the [device]N:1.0 etc but I can’t get any of this to work with the powerflex…could it be not compatible?

I can’t get it to browse the tags.

thanks

---

<div class="post-metadata">

**Author:** ![CalculusAE](https://avatars.discourse-cdn.com/v4/letter/c/7ab992/32.png) [@CalculusAE](https://forum.inductiveautomation.com/u/CalculusAE)\
**Post date:** [May 1, 2014, 3:27am UTC](https://forum.inductiveautomation.com/t/powerflex-525/8393/2 "2014-05-01T03:27:50Z")

</div>

Hi,

I found the N File information and have manually added the tags I need to see the voltage, current and hertz for a condition monitoring exercise.  
Thanks