# Powermonitor 5000 not giving tags

**URL:** <https://forum.inductiveautomation.com/t/powermonitor-5000-not-giving-tags/82491>\
**Category:** General Discussion\
**Tags:** rockwell\
**Created:** [November 29, 2023, 6:25pm UTC](https://forum.inductiveautomation.com/t/powermonitor-5000-not-giving-tags/82491 "2023-11-29T18:25:00Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\
**Post date:** [November 29, 2023, 7:13pm UTC](https://forum.inductiveautomation.com/t/powermonitor-5000-not-giving-tags/82491/2 "2023-11-29T19:13:37Z")

</div>

I didn't read this topic, but perhaps it has something helpful for you.

> [@Allen Bradley PowerMonitor 5000](https://forum.inductiveautomation.com/t/allen-bradley-powermonitor-5000/10341):
>
> Hi All, We recently setup an Allen Bradley PowerMonitor 5000 and I’m trying to link it to Ignition over E-IP. We have successfully setup the meter and can communicate via the web based interface included with the meter. I was able to get the device “connected” in the configuration screen using the Allen Bradley Logix Driver. However, when I try to look for tags in the OPC browser, nothing shows up when I try to expand the tab for the meter. Here’s an excerpt from the manual: All PowerMonit…

---

_[View the full topic](https://forum.inductiveautomation.com/t/powermonitor-5000-not-giving-tags/82491)._