# Powermonitor 5000 not giving tags

**URL:** <https://forum.inductiveautomation.com/t/powermonitor-5000-not-giving-tags/82491>\
**Category:** General Discussion\
**Tags:** rockwell\
**Created:** [November 29, 2023, 6:25pm UTC](https://forum.inductiveautomation.com/t/powermonitor-5000-not-giving-tags/82491 "2023-11-29T18:25:00Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Jared\_Kossler](https://avatars.discourse-cdn.com/v4/letter/j/c37758/32.png) [@Jared\_Kossler](https://forum.inductiveautomation.com/u/Jared_Kossler)\
**Post date:** [November 30, 2023, 6:29pm UTC](https://forum.inductiveautomation.com/t/powermonitor-5000-not-giving-tags/82491/9 "2023-11-30T18:29:30Z")

</div>

I figured out my mistake, I had over looked something in the other post. Thanks for pointing me to the Appendix A though that is thread that helped me getting this to work.

Setting them up as PLC5 just gave me a constant determining protocol issue. So I was playing with it on SLC and it will work but you have to enter the OPC Item Path manually. I had thought the path would be in the Browse OPC list, but it is not. So for example to get the V1 to N reading I entered ns=1;s=[MS\_Chiller1\_PM5000]F53:3.

---

_[View the full topic](https://forum.inductiveautomation.com/t/powermonitor-5000-not-giving-tags/82491)._