# PowerTable Enduser Manual - Filter multiple values per Column

**URL:** <https://forum.inductiveautomation.com/t/powertable-enduser-manual-filter-multiple-values-per-column/88422>\
**Category:** Ignition\
**Tags:** vision\
**Created:** [April 5, 2024, 1:22pm UTC](https://forum.inductiveautomation.com/t/powertable-enduser-manual-filter-multiple-values-per-column/88422 "2024-04-05T13:22:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![TiB](https://avatars.discourse-cdn.com/v4/letter/t/a587f6/32.png) [@TiB](https://forum.inductiveautomation.com/u/TiB)\
**Post date:** [April 5, 2024, 1:22pm UTC](https://forum.inductiveautomation.com/t/powertable-enduser-manual-filter-multiple-values-per-column/88422/1 "2024-04-05T13:22:05Z")

</div>

Hello Ignition Users and Developers,

i´ve included a Power Table into my Vision project that allows the users to filter specific columns like its needed.

There is also a custom filter option that allows to filter by individual conditions. When selecting e.g. "contains" as Condition a new field appears that allows to enter my Value(s).

**Is it possible to filter for multiple Values within that one filed?**  
**What will be the correct delimiter symbol used to separate the multiple values?**  
So in my example i would like to filter for "6110M" OR "6125M" within the same column.

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/e/1e7edc89dfcfeb1b68fae3e8f70258312dece8e9.png)

Thanks for sharing some insights!

---

<div class="post-metadata">

**Author:** ![justinedwards.jle](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/justinedwards.jle/32/37854_2.png) [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\
**Post date:** [April 5, 2024, 2:10pm UTC](https://forum.inductiveautomation.com/t/powertable-enduser-manual-filter-multiple-values-per-column/88422/2 "2024-04-05T14:10:18Z")

</div>

You could convert your operand dropdown and selection dropdown to a template, and then, use a template repeater to enable the user to add additional rows of filter dropdowns as needed.

I've also created a multiselect dropdown that is available for free on the ignition exchange that could be used to allow multiple filter items per column with a single operand selection:  
[https://inductiveautomation.com/exchange/2581/overview](https://inductiveautomation.com/exchange/2581/overview)

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [April 5, 2024, 4:06pm UTC](https://forum.inductiveautomation.com/t/powertable-enduser-manual-filter-multiple-values-per-column/88422/3 "2024-04-05T16:06:32Z")

</div>

I think you want to use the 'Is In' condition, and then separate your values with semicolons:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/5/e58adf1b02d36c3efd3039b6125d1c12b456ce37.png)

From this document, page 46:

> **[JIDE\_Grids\_Developer\_Guide.pdf](https://www.jidesoft.com/products/JIDE_Grids_Developer_Guide.pdf)**