# Print on a P-Touch p950nw printer

**URL:** <https://forum.inductiveautomation.com/t/print-on-a-p-touch-p950nw-printer/28841>\
**Category:** Ignition\
**Created:** [October 4, 2019, 4:45pm UTC](https://forum.inductiveautomation.com/t/print-on-a-p-touch-p950nw-printer/28841 "2019-10-04T16:45:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![marianjel\_11](https://avatars.discourse-cdn.com/v4/letter/m/3ec8ea/32.png) [@marianjel\_11](https://forum.inductiveautomation.com/u/marianjel_11)\
**Post date:** [October 4, 2019, 4:45pm UTC](https://forum.inductiveautomation.com/t/print-on-a-p-touch-p950nw-printer/28841/1 "2019-10-04T16:45:40Z")

</div>

Hello good morning, I have a label printer in which the label is designed and from ignition I must send the object to insert the number I want in the bar code and the label is made, but I don’t know where to start I have not done code of that type is for a tool control application.  
The printer is a p-touch p950nw