# Print Service?

**URL:** <https://forum.inductiveautomation.com/t/print-service/10504>\
**Category:** Ignition\
**Created:** [September 23, 2015, 3:27pm UTC](https://forum.inductiveautomation.com/t/print-service/10504 "2015-09-23T15:27:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![alewayhar](https://avatars.discourse-cdn.com/v4/letter/a/ebca7d/32.png) [@alewayhar](https://forum.inductiveautomation.com/u/alewayhar)\
**Post date:** [September 23, 2015, 3:27pm UTC](https://forum.inductiveautomation.com/t/print-service/10504/1 "2015-09-23T15:27:29Z")

</div>

I have a button that allows me to print my report, but when I launch the program and try to print it, it says that no print service is found. How do i set up a print service? Below is my script:

[code]report = event.source.parent.getComponent(‘Report Viewer’)

report.print()  
[/code]

Is it just like setting a printer up or do i need to script/code it into the button?

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [September 23, 2015, 4:36pm UTC](https://forum.inductiveautomation.com/t/print-service/10504/2 "2015-09-23T16:36:13Z")

</div>

Do you have any printers installed?

Come to think of it I’ve never run across this, but then I’ve always had a printer installed beforehand.

I’ll put a vm together to test.