# Problem with Gauge in Perspective

**URL:** <https://forum.inductiveautomation.com/t/problem-with-gauge-in-perspective/37681>\
**Category:** Ignition\
**Created:** [August 13, 2020, 3:27pm UTC](https://forum.inductiveautomation.com/t/problem-with-gauge-in-perspective/37681 "2020-08-13T15:27:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rodrigo.mocca](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/rodrigo.mocca/32/14947_2.png) [@rodrigo.mocca](https://forum.inductiveautomation.com/u/rodrigo.mocca)\
**Post date:** [August 13, 2020, 3:27pm UTC](https://forum.inductiveautomation.com/t/problem-with-gauge-in-perspective/37681/1 "2020-08-13T15:27:46Z")

</div>

Hi,  
I’m using a simple gauge, but the values are not showing completely:  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/3/639ede97b617ac58fdd2b8f3f8ccd8f89e55668f.png)  
As you can see, the 50 value is cut.  
To get this control showing at 100% I have to make it really big.

How can I fix that?

---

<div class="post-metadata">

**Author:** ![michael.mccabe](https://avatars.discourse-cdn.com/v4/letter/m/50afbb/32.png) [@michael.mccabe](https://forum.inductiveautomation.com/u/michael.mccabe)\
**Post date:** [December 9, 2020, 4:15pm UTC](https://forum.inductiveautomation.com/t/problem-with-gauge-in-perspective/37681/2 "2020-12-09T16:15:12Z")

</div>

Was there any update on this?  
I feel its something I am doing wrong.