# Process Control - SFC Module?

**URL:** <https://forum.inductiveautomation.com/t/process-control-sfc-module/18121>\
**Category:** Ignition\
**Created:** [May 22, 2018, 5:21pm UTC](https://forum.inductiveautomation.com/t/process-control-sfc-module/18121 "2018-05-22T17:21:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![carolineuchoa.estuda](https://avatars.discourse-cdn.com/v4/letter/c/ba8739/32.png) [@carolineuchoa.estuda](https://forum.inductiveautomation.com/u/carolineuchoa.estuda)\
**Post date:** [May 22, 2018, 5:21pm UTC](https://forum.inductiveautomation.com/t/process-control-sfc-module/18121/1 "2018-05-22T17:21:05Z")

</div>

Hello,

I’d like to know if it is possible to use SFC Module or any other module to do process controlling, where the user chooses the Manipulated Variable, Controlled Variable, etc, and then with a 2d interpolation and other stuff we can get the Controller Output. I’m using Labview to do that “intelligent part” of the Ignition project, but I’d like to do all that in the same place, Ignition.

I’ve read that Ignition uses Python 2.5, so that modules like scipy and numpy can’t be incorporated. Is there any other way I can to this heavy math like I do by using Labview?

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![brandon1](https://avatars.discourse-cdn.com/v4/letter/b/ea666f/32.png) [@brandon1](https://forum.inductiveautomation.com/u/brandon1)\
**Post date:** [May 22, 2018, 7:21pm UTC](https://forum.inductiveautomation.com/t/process-control-sfc-module/18121/2 "2018-05-22T19:21:34Z")

</div>

Take a look at this post:

> [@Best way to do heavy math operations in Ignition?](http://forum.inductiveautomation.com/t/best-way-to-do-heavy-math-operations-in-ignition/15412):
>
> I know Jython is very powerful for scripting, but i was wondering if there’s any module (java or python) compatible in ignition that compares to the capabilites that numpy could have. Best,