# Production Report Data Help

**URL:** <https://forum.inductiveautomation.com/t/production-report-data-help/38502>\
**Category:** Ignition\
**Created:** [September 9, 2020, 12:13am UTC](https://forum.inductiveautomation.com/t/production-report-data-help/38502 "2020-09-09T00:13:50Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![garth.reynolds](https://avatars.discourse-cdn.com/v4/letter/g/ee7513/32.png) [@garth.reynolds](https://forum.inductiveautomation.com/u/garth.reynolds)\
**Post date:** [September 9, 2020, 12:13am UTC](https://forum.inductiveautomation.com/t/production-report-data-help/38502/1 "2020-09-09T00:13:50Z")

</div>

Hi,

Firstly im using Ignition version 7.6.4.

Im new to this site as well as Ignition so am need of some assistance to get this task done.

Im trying to create a data table in an existing PDF report to show multiple production counts incremented throughout the day.

I have set up the counters in an OEE production cell as individual production counts, I have then linked these OEE tags to the Line Cell as additional factors.

In the report project I have set up a data analyser to use these counts to form table data, and im able to see the counts in the table data within the data analyser.

Iv then added a data set to the PDF custom properties and linked it to the table data of the data analyser and again I can see the table data in the data set.

However when open the report editor and add the keys to the report i have Null value or N/A?

Is there a different or preferred method of displaying multiple cell production counts? can I separate them.

I appreciate any help you can give.

Thanks

Garth