# Project polling rate/How fast can tags update?

**URL:** <https://forum.inductiveautomation.com/t/project-polling-rate-how-fast-can-tags-update/45707>\
**Category:** Ignition\
**Created:** [April 16, 2021, 9:18pm UTC](https://forum.inductiveautomation.com/t/project-polling-rate-how-fast-can-tags-update/45707 "2021-04-16T21:18:39Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [April 16, 2021, 10:43pm UTC](https://forum.inductiveautomation.com/t/project-polling-rate-how-fast-can-tags-update/45707/3 "2021-04-16T22:43:42Z")

</div>

Hmmm. Do those processors support Ethernet/IP ? If so, you might like this:

> [@Snappy user interfaces with the Ethernet/IP Module](http://forum.inductiveautomation.com/t/snappy-user-interfaces-with-the-ethernet-ip-module/12617):
>
> Automation Professionals [Ethernet/IP Class1 Communications Module](https://www.automation-pros.com/modulesales.html) has been in beta for a few months with no recent issues. A release to production use is approaching soon and I thought I’d share a test project and its matching PLC code I’ve been using to exercise the module’s base features. In the simplest setup, this driver presents a virtual I/O chassis to to the outside world, populated with up to 100 virtual I/O modules – I/O modules that also appear to be ControlLogix processors with user…

Yes, 100ms User Interface response times are possible.

{Older post, but the module is up to date with v8.1.}

---

_[View the full topic](https://forum.inductiveautomation.com/t/project-polling-rate-how-fast-can-tags-update/45707)._